WeatherTRAK^® OptiFlow^® XR

Advanced Flow Made Easy

WeatherTRAK OptiFlow XR^® is an advanced flow management controller available in conventional wire or 2-Wire configurations. OptiFlow XR leverages its visual and easy-to-use interface making it easy to manage complex flow across entire sites. By enabling controllers to share information in the cloud, OptiFlow XR optimizes how, when and where watering takes place within your water windows. All-inclusive options available, which include subscription and warranty for ten years.

FeaturesOptiFlowModelsSpecificationsAccessories

Sites with complex hydraulics are now easier to manage than ever

Reduce irrigation times to meet water windows or site demands

OptiFlow Conventional

Support for 12 to 96 stations
Six station modularity
Ten-year warranty
Worry-free Wireless Warranty™ covers cellular technology upgrades

OptiFlow 2-Wire

Supports up to 200 stations
Ten-year warranty
Worry-free Wireless Warranty™ covers cellular technology upgrades

Features

Programming

Eight simultaneous programs with five program modes and two start times
Program all settings at controller, or remotely
Independent station programming (72 cycles/ station) with automated cycle and soak
User-defined water days and water windows per program to comply with agency regulations
Built-in WeatherTRAK Scheduling Engine optimizes by plant, soil, sprinkler, sun exposure, and slope data
Automated daily runtime adjustments using site-specific ET Everywhere weather data
Percent adjust to enable fine-tuning by station
Automated skip days based on zone-specific soil moisture depletion
Runtime rationing protects plant health under constricted water windows
Stacked station manual watering from 1-99 minutes

The HydroPoint H2O platform leverages the industry’s most dynamic 2-Wire technology to provide a powerful solution for smart controllers, valve decoders, and accessories. The system includes:

Smart controllers capable of flow management, real-time alerts, and cloud-based control
Valve decoders with bi-directional communication, multi-valve management, and built-in LEDs
Accessories that enable control over master valves, flow sensor data, and pump start relays
Supports up to 4 master valves and 4 flow sensors using direct connect terminals and/or 2-wire decoders

Integrated Flow

Mainline/catastrophic break detection and shutdown
Real-time station-specific flow monitoring and control
Local and remote station-learned flow
Fault detection, diagnostics, and alerts
Supports up to four flow sensor inputs and master valve outputs
Supports normally open or normally closed master valves
Customizable flow alert thresholds
Upgradable to OptiFlow^® for advanced flow management and multi-controller automatic scheduling
Supports Data Industrial^®, CST, Netafim^™ flow sensors and custom “K and offset” values
Compatible with WeatherTRAK FlowLink^®, FlowShare, Flow3, and FlowHD

Advanced Flow & Control

Panel lock with pin code for security
Up to 10 controllers can share a point of connection on a mainline
Up to 10 Manager controllers can support up to 40 POCs on a single mainline
Up to 30 controllers can share a single mainline with multiple POCs
Dynamic scheduling and optimization of hundreds of thousands of stations across a water source.
Optimize hundreds of mainlines and hundreds of thousands of stations across a water source
Minute level flow resolution stored in the cloud
Newly Optimized schedules sent to the controller each day based on the latest ET Weather
Set Catastrophic leak thresholds
Access via desktop, tablet, and mobile with WeatherTRAK Central and WeatherTRAK Mobile

Hardware

Integrated flow sensor support included
Dedicated master valve and pump start
Commercial-grade screw-less wire terminals
Built-in amp meter for fault protection and diagnostics
Cellular radio and first year of WeatherTRAK Central service included
LTE cellular communication for the best coverage and performance
32-pin connector for hardware remote like the TRC Commander and Irritrol® ProMax™(OptiFlow XR Conventional only)
New features and firmware pushed over-the-air using WeatherTRAK Cloud Update
Share one rain sensor across multiple controllers with RainShare™
Robust built-in surge protection integrated directly into the controller

OptiFlow

WeatherTRAK with OptiFlow is a ground breaking solution that helps manage restrictive water windows, keeping things running as close to capacity as possible and delivering water where it’s needed with the time available. Working in conjunction with WeatherTRAK OptiFlow XR, WeatherTRAK ET Pro3 controllers and WeatherTRAK Central, OptiFlow is the industry’s first solution to optimize and maximize flow across an entire site from the cloud.

Maximize Water Windows

Imagine a scenario where you have multiple controllers that share a single mainline from a single point of connection. Each controller has its own water windows and programming requirements.

Instead of forcing you to figure out the schedule for hundreds of stations across multiple controllers, OptiFlow does the work for you. Once the OptiFlow XR controllers are joined together as a flow group, they operate as a single system, sharing flow data and coordinating schedules for optimal efficiency.

Models

OptiFlow XR (CWM)

12 – 48 Station
Conventional Wiring
WALL MOUNT: Cold-Rolled Steel

18-gauge, powder-coated, cold-rolled steel, wall mount enclosure with key-lock entry.

OptiFlow XR (CWM)

72 & 96 Station Conventional Wiring
WALL MOUNT: Cold-Rolled Steel

18-gauge, powder-coated, cold-rolled steel, wall mount enclosure with key-lock entry. Two separate enclosures.

OptiFlow XR 2-Wire (CWM)

48 & 96 & 200 Station
WALL MOUNT: Cold-Rolled Steel

18-gauge, powder-coated, cold-rolled steel, wall mount enclosure with key-lock entry. Station valve decoders not included.

Cold-Rolled Steel Pedestal

16-gauge, powder-coated, cold-rolled steel pedestal enclosure w/ key-lock entry. Controller sold separately.

OptiFlow XR (SWM)

12 – 48 Station Conventional Wiring
WALL MOUNT: Stainless Steel

18-gauge, stainless steel, wall mount enclosure w/ key-lock entry.

OptiFlow XR (SWM)

72 & 96 Station Conventional Wiring
WALL MOUNT: Stainless Steel

18-gauge, stainless steel, wall mount enclosure w/ key-lock entry. Two separate enclosures.

OptiFlow XR 2-Wire (SWM)

48 & 96 & 200 Station
WALL MOUNT: Stainless Steel

18-gauge, stainless steel, wall mount enclosure w/ key-lock entry. Station valve decoders not included.

Stainless Steel Pedestal

Sub-assembly for Pedestal Conversion

16-gauge, stainless steel, pedestal enclosure w/ key-lock entry. Controller sold separately.

Enclosures

OptiFlow XR (SPH)

12 – 48 Station Conventional Wiring
Includes control panel, antenna, and terminal boards pre-installed

14-gauge stainless steel, NEMA 3R rated front-entry enclosure w/ key-lock entry. VIT Strongbox enclosure model
no. SB-18SS.